Spray Freeze Drying Granulation Unit SFD-1000,1100 - EYELA World
nulation Unit SFD-1000,1100
广西科米瑞实验仪器设备有限公司提供 EYELA Spray Freeze Drying Granulation Unit SFD-1000,1100 - EYELA World 产品资料、选型咨询、供货报价和售后服务支持,价格面议。
← 返回产品列表
HOME > Product line-up > Spray Dryers > Spray Freeze Drying Granulation > Spray Freeze Drying Granulation Unit SFD-1000,1100
• Spray freeze drying (SFD) granulation method
• Enables preparation of porous samples with extremely high solubility
◊ This product was jointly developed with Professor Koichi Okamoto and Researcher Takehiro Noda from the Faculty of Pharmaceutical Sciences, Meijo University, Japan.
• Features and images of fine particles dried by each drying method
D-Mannitol (a type of sugar alcohol commonly used as a sample in pharmaceutical research) Note: Electron microscope image, 2000x magnification
| Product | Spray Freeze Drying (SFD) Granulation Unit |
|---|---|
| Set name | Pre+Post-process (Full system) | Pre-process System |
| 型号 | SFD-1000 | SFD-1100 |
| Cat. No. | 279492 | 279501 |
| Processing volume | Max. 150mL/batch |
| Spraying air pressure adjustment range | 100 to 250kPa |
| Pump flow rate range | 51 to 900mL/h (Peristaltic pump NRP-1000 ) |
| Sample stirring speed range | 50 to 1600rpm (Powerful magnetic stirrer RCX-1100D ) |
| Spray nozzles | Two-fluid nozzle (nozzle hole diameter 0.71mm: nominal diameter 2) |
| Air compressor | Option: Discharge air volume 10L/min (50Hz), control pressure 300kPa |
| Freeze dryer trap temperature | -80°C | - |
| Freeze dryer dehumidification volume | 750mL/batch | - |
| Control panel | Spray air valves (x 2), Bourdon tube vacuum gauge, Flow control knob, AC outlet (for spray air pump, peristaltic pump, powerful magnetic stirrer), Power connector for anti-frost heater, Power switch (for pump, heater, and overall), Fuses (x 3) |
请填写必填信息,我们将在工作日尽快回复。
| Vacuum insulated vessel |
|---|
| Standard 3L stainless steel vessel (148 OD x 243H mm) |
| Vacuum insulated vessel lid | Spray nozzle with vertical stroke length of 39mm, Liquid nitrogen gas exhaust nozzle (20.5mm OD), Heater (100W x 2) for frost prevention |
|---|
| Tubing diameter | 3.15 ID x 5.2mm OD (silicone tubing) |
|---|
| Spray air connection diameter | 4 ID x 6mm OD (union joint for flexible urethane tubing) |
|---|
| Exhaust connection diameter | 20.5mm OD |
|---|
| Ambient operating temperature | 5 to 35°C |
|---|
| Supply voltage | 100VAC 50/60Hz |
|---|