Cutting Mill Combination PULVERISETTE 19 large /PULVERISETTE 19

new PULVERISETTE 19 large - variable speed 300-3000 rpm PULVERISETTE 19 large - variable speed 50-700 rpm PULVERISETTE 15 PULVERISETTE 29 PULVERISETTE 19 - variable speed 50-700 rpm PULVERISETTE 19 - variable speed 300-3000 rpm

Mortar Grinders Disk Mills Jaw Crushers

Rotor / Beater Mills Knife Mill Ball Mills

Cutting Mill Combination

PULVERISETTE 19 large /PULVERISETTE 19

Patented fully-automated, two-stage comminution

Sample exhaustion via high-performance Cyclone separator in a collecting vessel 60 litres

Integrated sample division for fine size reduction

Various cutting rotors in different materials available

AGRICULTURE AND FORESTRY

OVERVIEW Patented power team With the extra powerful, patented FRITSCH Cutting Mill Combination of the Universal Cutting Mill PULVERISETTE 19 large with variable rotational speed of 50-700 rpm and the Universal Cutting Mill PULVERISETTE 19 with a variable rotational speed of 300-3000 rpm, as well as the associated FRITSCH high-performance Cyclone separator, it is possible, for example, to process 2 litres of sample material with a particle size of 30 mm in only one single step. It doesn‘t matter how heterogeneous the sample is – even household waste, construction waste, German recycling system bales or light shredder fractions from automobile recycling: Within five minutes, our extra-powerful double mill will reduce any of these materials into a representatively divided analysis sample with a final fineness of < 500 μm! This is the ideal solution for inexpensive preparation of heterogeneous materials for analysis according to the Technical Instructions on Municipal Waste (TOC) or for determination of the calorific value and chlorine content.

With the extra powerful, patented FRITSCH Cutting Mill Combination of the Universal Cutting Mill PULVERISETTE 19 large with variable rotational speed of 50-700 rpm and the Universal Cutting Mill PULVERISETTE 19 with a variable rotational speed of 300-3000 rpm, as well as the associated FRITSCH high-performance Cyclone separator, it is possible, for example, to process 2 litres of sample material with a particle size of 30 mm in only one single step. It doesn‘t matter how heterogeneous the sample is – even household waste, construction waste, German recycling system bales or light shredder fractions from automobile recycling: Within five minutes, our extra-powerful double mill will reduce any of these materials into a representatively divided analysis sample with a final fineness of < 500 μm! This is the ideal solution for inexpensive preparation of heterogeneous materials for analysis according to the Technical Instructions on Municipal Waste (TOC) or for determination of the calorific value and chlorine content.

WORKING PRINCIPLE Operating principles of the powerful FRITSCH Cutting Mill Combination The extra powerful FRITSCH Cutting Mill Combination consists of the Universal Cutting Mill PULVERISETTE 19 large with variable rotational speed of 50-700 rpm and the Universal Cutting Mill PULVERISETTE 19 with a variable rotational speed of 300-3000 rpm. The entire sample is pre-crushed by the PULVERISETTE 19 large then falls automatically through a funnel into a sample divider which divides the sample according to a 1:13 ratio by default. The division ratio is variable. This smaller sample is then automatically comminuted in the PULVERISETTE 19 down to a final fineness of 0.1 mm and drawn into the collecting vessel by the connected FRITSCH high-performance Cyclone separator. Through selection of the cutting tool sets and sieve cassettes, the FRITSCH Cutting Mill Combination can be individually adapted to any specific application. All accessories of the PULVERISETTE 19 large and PULVERISETTE 19 are available for this.

Operating principles of the powerful FRITSCH Cutting Mill Combination The extra powerful FRITSCH Cutting Mill Combination consists of the Universal Cutting Mill PULVERISETTE 19 large with variable rotational speed of 50-700 rpm and the Universal Cutting Mill PULVERISETTE 19 with a variable rotational speed of 300-3000 rpm. The entire sample is pre-crushed by the PULVERISETTE 19 large then falls automatically through a funnel into a sample divider which divides the sample according to a 1:13 ratio by default. The division ratio is variable.

This smaller sample is then automatically comminuted in the PULVERISETTE 19 down to a final fineness of 0.1 mm and drawn into the collecting vessel by the connected FRITSCH high-performance Cyclone separator.

Through selection of the cutting tool sets and sieve cassettes, the FRITSCH Cutting Mill Combination can be individually adapted to any specific application. All accessories of the PULVERISETTE 19 large and PULVERISETTE 19 are available for this.

FEATURES Maximum feed size 120 x 85 mm Patented fully-automated two-stage comminution Defined final fineness due to interchangeable sieve cassettes 0.1 – 20 mm, (further sieve sizes available) Sample exhaustion via high-performance Cyclone separator in a collecting vessel 60 litres Integrated sample division to reduce quantity for fine size reduction Sample cooling during the comminution process Processing of sample material with moisture content up to 30 % Exceptionally high material throughput Cutting rotor and sieve cassette can be removed and replaced without tools

Maximum feed size 120 x 85 mm

Patented fully-automated two-stage comminution

Defined final fineness due to interchangeable sieve cassettes 0.1 – 20 mm, (further sieve sizes available)