Fiber Optic Spectrum Analyzer Features

Fiber Optic Spectrum Analyzer Features Reliably Measure wavelength emissions from Lasers, Laser Diodes, & LEDs Characterize optical output and wavelength stability with time, temperature, and device drive current Options available for UV, VIS, & NIR wavelengths 190-2200nm High Resolutions down to 0.05nm Low cost, Research Grade, and portable SpectraWiz Mobile App and new interface options via SMART-Control Fiber Optic Spectrum Analyzer Overview These instruments are used to measure wavelength emissions from Lasers, Laser Diodes and LED’s into the near infrared. A fiber optic cable is used to couple the output from the test device into the spectrometer. The instrument allows characterization of the wavelength stability with time, temperature, and device drive current. Depending on your application and wavelength requirements, StellarNet can offer high resolution spectrometers up to 0.1nm resolution. Contact StellarNet for availability of other wavelength range and resolutions. Optical Fibers For 1310 and 1550nm laser diodes, a fiber is used to couple the ST device connector with a spectrometer input connector (SMA). Other couplings use a 600um fiber with a lens attached to a SMA bulkhead fitting that can be easily mounted in the device emission path. Fast delivery: most system can be calibrated and shipped within 1 week after receipt of order. Absolute calibration: accuracy within 10% at detector integration setting used for calibration. Certificate available: documentation with NIST traceable serial numbers. If the user has an appropriate irradiance calibration source lamp, a field re-calibration can be easily performed using the included SpectraWiz software. Fast delivery: most system can be calibrated and shipped within 1 week after receipt of order Absolute calibration: accuracy within 10% at detector integration setting used for calibration If the user has an appropriate irradiance calibration source lamp, a field re-calibration can be easily performed using the included SpectraWiz software Spectrum Analyzer Sample Spectra SpectraWiz software enables wavelength measurements of emission peaks, peak area centroid, FWHM (Full Width Half Max), and dBm. NIR2-HR HgA Emission Spectra using High Resolution NIR2-HR model spectrometer. StellarNet spectrometers can be built to customer specification in most cases. There is no extra charge for a ‘custom’ range spectrometer; however, it does become a non-returnable item. High Resolution Spectrometer Models Spectrometer model Wavelength Range (nm) Grating (g/mm) Grating Range (nm) Dispersion (nm/pixel) Slit-25 Res (nm) Slit-14 Res (nm) HR-UV3 200-300 2400 100 0.048 0.21 0.14 HR-UV3b 300-400 2400 100 0.048 0.21 0.14 HR-UV4 200-340 1800 140 0.068 0.30 0.20 HR-VIS 350-750 600 400 0.195 1.20 0.80 HR-NIR 500-900 600 400 0.195 1.20 0.80 HR-NIR2 900-1075 1200 175 0.085 0.80 0.40 HR-NIR3 750-850 1800 100 0.049 0.30 0.20 HR-NIR4 500-580 2400 80 0.039 0.12 0.08 High Resolution Spectrometer Models Spectrometer Options for Fiber Optic Spectrum Analysis BLUE-Wave Visible spectrometers with many models over the 350-1150nm range (UV options available). High resolution and narrow wavelength range. $ 3,360.00 DSR-CSR-512 BLACK-Comet model C-SR (UV-VIS-NIR, CCD) and DWARF-Star- NIR-512 (InGaAs PDA) for 200-1700nm $19,450.00 HR The HR Spectrometer Series consists of our high resolution spectrometers over the UV, VIS, & NIR wavelength range from 190-2300nm $ 4,200.00 HR-X HR-X Hi-Res Spectrometer Series consists of our highest resolution spectrometers yet with many models over the UV, VIS, & NIR wavelength range $ 6,300.00 InGaAs-1024-NIR3-HR NIR Spectrometer, 1500-1640nm, with cooled 1024 element InGaAs PDA detector $ 22,575.00 DSR-CSR-1024 BLACK-Comet model C-SR (UV-VIS-NIR, CCD) and DWARF-Star-NIR- 1024 (InGaAs PDA) for 200-1700nm $24,450.00 Visible spectrometers with many models over the 350-1150nm range (UV options available). High resolution and narrow wavelength range. BLACK-Comet model C-SR (UV-VIS-NIR, CCD) and DWARF-Star- NIR-512 (InGaAs PDA) for 200-1700nm The HR Spectrometer Series consists of our high resolution spectrometers over the UV, VIS, & NIR wavelength range from 190-2300nm HR-X Hi-Res Spectrometer Series consists of our highest resolution spectrometers yet with many models over the UV, VIS, & NIR wavelength range NIR Spectrometer, 1500-1640nm, with cooled 1024 element InGaAs PDA detector BLACK-Comet model C-SR (UV-VIS-NIR, CCD) and DWARF-Star-NIR- 1024 (InGaAs PDA) for 200-1700nm Spectrum Analysis Accessories F600-VISNIR Armored, 600um diameter single strand, multimode fiber optic cable with black PVC jacket and 2 SMA conectors-2 meter length for wavelength range 400-2200nm. $ 210.00 F600-UVVis-SR Armored, Solarization Resistant, 600um diameter single strand, multimode fiber optic cable for Deep UV application with black PVC jacket and 2 SMA connectors-2 meters length for wavelengths <400nm. $ 235.00 CR2 Miniature cosine receptor for UV-VIS–NIR, 1/4 inch diameter with fiber optic cable attachment for irradiance measurements. Calibration performed using NIST traceable lamp operating from 200-1700nm. Buy Online $ 210.00 Col-Tubes Cosine receptor holder with field of view reducing extension tubes. Can be used as a tripod or handheld pointer (gun) for the cosine receptor accessory. Comes with a set of 3 field of view reducing “collimating tubes” with 10, 20, and 30 deg FOV. Custom lengths also available. Buy Online $ 265.00 CR2-TP miniature Tri-Pod stand for CR2 with 3 folding legs, setup any orientation, case included. $ 75.00 IC2 Integrating Cube (Light Sphere), 2 inch cube with 5/8 inch input port, 1 SMA fiber output, Barium Sulfate white coating. Buy Online $ 630.00 IC2-TP miniature Tri-Pod stand for IC2 with 3 folding legs, setup any orientation, case included $ 75.00 IS6 is a 6” integrating sphere with a 2.0” input port, 1 SMA fiber optic output, and internal white coating. Buy Online $ 2,155.00 IS-Lamp is a Calibrated Miniature 10 Watt fiber optic VIS-NIR light source for the IS6 mounted on a 2″ port cap, 400-1050nm, NIST traceable. Includes lamp with data file used to calibrate the system for total flux measurements in watts/nm and lumens/nm. $ 685.00 IS-SMA is a SMA connector mounted on a 2″ port cap with internal white coating. Allows direct connect of SMA terminating optical fibers to integrating sphere $ 185.00 IS-RED is a 2″ port cap with reduced sized 1″ diameter aperture with internal white coating $ 185.00 Armored, 600um diameter single strand, multimode fiber optic cable with black PVC jacket and 2 SMA conectors-2 meter length for wavelength range 400-2200nm. Armored, Solarization Resistant, 600um diameter single strand, multimode fiber optic cable for Deep UV application with black PVC jacket and 2 SMA connectors-2 meters length for wavelengths <400nm. Miniature cosine receptor for UV-VIS–NIR, 1/4 inch diameter with fiber optic cable attachment for irradiance measurements. Calibration performed using NIST tracea