600LS Laser Extensometer

Tinius Olsen model 600LS non-contacting extensometer is designed to measure the extension of medium to high elongation materials, typically elastomers. Since there is no contact of this extensometer with the sample, the 600LS is ideal for also measuring the elongation of fragile samples where such contact could induce a premature sample break. The model 600LS uses a low power laser diode with precision optical components and a dedicated 32 bit processor. The laser projects a visible red scanning beam that is directed at two reflective targets attached to the specimen. An additional benefit of using laser technology is its ability to scan the test specimen through the glass viewing window of an environmental test chamber. Elongation characteristics can then be evaluated from –70° C to 300° C.

Marking the test specimen with gauge marks is easy using two pieces of self-adhesive reflective tape (supplied) no less than 2mm in width. Any gauge length size maybe defined, minimum 10mm, this is accurately measured and automatically recorded by the extensometer at the start of the test. Once the test starts the instantaneous strain is automatically captured using the scanning laser at a scan rate of 660 times per second (660 Hz). If the scanning beam is interrupted for any reason, strain measurements are automatically corrected and continued when the laser beam is clear and picks up the gauge mark targets.

Range of measurement: up to 600mm/up to 23.6in Gage lengths: 10mm to full scan/0.39in to full scan Accuracy: 1% on 25mm gauge length, BS 5214 grade D Resolution: 0.002mm with filtering/7.87e-5in with filtering Optical scan: 660 scans per second/90 degrees Dimensions (HxWxD): 290 x 95 x 144mm/11.4 x 3.7 x 5.7in Weight: 4.0kg/8.8lb

Please read these terms and conditions carefully before using Our Service.

The words whose initial letters are capitalized have meanings defined under the following conditions. The following definitions shall have the same meaning regardless of whether they appear in singular or in plural.

For the purposes of these Terms and Conditions: